Blur's box blur moves to effects/box_blur.hpp so both share it; Blur renders
exactly as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Corrupt's block damage moves to effects/corrupt_blocks.hpp so both share it;
Corrupt renders exactly as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Film grain's field moves to effects/grain_field.hpp so both share it; Film
grain renders exactly as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The run sorting moves to effects/sort_runs.hpp so both share it; Pixel sort
renders exactly as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Warp's noise field moves to effects/noise_field.hpp so both share it; Warp
renders exactly as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The preview plays a draft of every third frame, each held for three, as
soon as those are in, and fills in the frames between while it plays.
renderFrames takes an optional frame order (draftFirstOrder builds this
one); a frame is the same whatever order it is rendered in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Quality dropdown under Video on Setup, --video-quality on the command
line, and "quality" in a project's video settings (written only when it is
not Standard). One table, videoQualities(), holds the ffmpeg settings per
codec; Standard is what every video was written with before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Tile swap lays tiles cut from the photographs over the canvas as Tiles
does, in a grid, in bricks or scattered, and swaps each one for another
cut at a moment of its own, so the mosaic keeps changing piece by piece.
The layout stays put for the whole clip; what a tile shows depends only
on the tile and how many times it has swapped, counted round the clip, so
it holds still between swaps and the clip loops without a jump. On the
command line it is -e tileswap with --tileswap-rate and the rest.
VideoEffect learns a second kind: an effect that answers needsSources()
writes compose() instead of animate(), and the base then takes no crop,
only the one seed, so it sees the photographs when it leads the chain and
the stage before it otherwise. Transforms render exactly as before. The
tile cutting and painting move out of tiles.cpp into tile_plan.hpp for
both effects to share; Tiles renders byte for byte as before. Version
0.8.0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Effect::video() says which kind an effect is. The Add effect menu lists the
two kinds in sections of their own, each scrolling on its own, and offers
video effects only in a video project; a video stage carries a film icon in
the chain and, in a still, is dimmed and skipped like a stage switched off.
enabledStages takes whether the render is a video and is the one place that
leaves video stages out of a still. --help groups the video effects under a
heading of their own, --list-effects marks them, and a video effect given
for a still is skipped with a warning.
VideoEffect is the base every video effect builds on, and keeps the rules a
moving stage has to follow: it takes one value from the shared rng, the same
on every frame, and hands the effect steady and per-frame generators and
loop-rounded time through a Moment, so a subclass writes only animate().
VHS tracking is the first, and the one to copy: the colour planes sway and
shake and a tracking bar rolls down the picture.
That motion moves out of channel split, which is an image effect again and
renders stills exactly as before; forVideo() goes with it. Version 0.7.0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Opening a project of ninety 17 MP photos got Effector killed by the
kernel's OOM killer: 4.6 GB of decoded RGB on a machine with 3.6 GB free,
and no core dump to show for it. Bulk allocations are now sized first and
refused with an OutOfMemoryError past three quarters of the free memory
(MemAvailable, or less under a cgroup memory.max). loadImages sizes the
batch from the file headers and refuses it before decoding anything, and
holds the decodes in flight to what is left; renderChain and renderFrames
refuse a canvas at 24 bytes a pixel, plus any picture a Path param loads.
The interface keeps a refused batch's paths, so saving the project never
drops them. Version 0.6.1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A project can now be a clip: Setup has a Video switch with a length, a
frame rate and presets that set the canvas too (Instagram story, reel and
feed video, TikTok / YouTube Short, Square loop, Full HD clip). The preview
renders the whole clip, shrunk to a memory budget, and loops it with
play/pause and a scale; Save As... renders it again at full size and pipes
the frames into ffmpeg as .mp4, .mov, .mkv, .webm or .gif, with a progress
window that can cancel. --duration, --fps and --video-preset do the same
from the command line.
Effects learn about time through FrameTime and Effect::renderFrame, which
falls back to render, so nothing that holds still changes. Channel split
now sways, shakes and rolls a tracking bar down the picture in a video; its
motion params are marked forVideo() and hidden in a still project, and a
still renders byte for byte as before. renderFrames starts every frame
from the same seed and renders the still stages ahead of the first moving
one only once. The version moves to 0.6.0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
packaging/arch/PKGBUILD builds the tagged release from this repository
and installs it with pacman; the version test keeps its pkgver in step
with CMakeLists.txt. A desktop entry puts the interface in the app menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The version is the project() line of CMakeLists.txt and nowhere else:
CMake writes it, with the text of CHANGELOG.md, into a generated
core/version.hpp, so the number and the release notes the binary shows
are the ones it was built from. effector --version (-V) prints it, and
the header-bar menu gains a section with Changelog, a window laying the
Markdown out as headings and bullets, and About Effector.
The core tests hold the newest changelog entry to the current version,
so a bump cannot go in without its notes. Releases are tagged vX.Y.Z;
this is 0.5.0, and the changelog reconstructs 0.1.0-0.4.0 from the
history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Projects opened or saved go into GTK's shared recent list, signed with the
effector application name, and the project menu lists the newest ten of
them. The GUI tests point XDG_DATA_HOME at a temporary folder so they leave
the user's own list alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A blurred copy of the overlay's own alpha is drawn in a colour beneath it:
moved by an offset for a shadow, centred for a glow, with a size, a spread
and an opacity. The mask is integer-only so a seed still reproduces it, and
reaches past the canvas so an image lying off it still casts onto it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The split between the chain list and the params sat at a fixed 300 px,
wrong for a short chain and for a long one alike. It now rests under the
chain's rows, growing with the chain up to eight stages before the list
scrolls. Once the user drags it, it stays put; a double-click on the
handle fits it to the rows again.
GtkPaned sizes the fixed pane from its minimum height, which is only the
drag floor here, so the fit is done by hand from the natural height.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Effect::label(values) names a stage in a list, defaulting to the title;
the text effect answers "Text (words)", and the chain rows are renamed
in place as params change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
text_rotation turns the text and its box about the box's centre, so the
centring and the offset still decide where it sits. Like the other
placement params it stays on the stage and is not carried by a style.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The sidebar grew crowded as the chain got longer. The chain and the params
of the selected stage now share a Chain tab through a vertical split the
user drags, and the sources, canvas and seed move to a Setup tab. Stage
rows are compact, with their move and remove buttons shown only on the
hovered, selected or focused row.
Add effect had stopped opening: its menu of fifteen effects no longer fit
below the button, and GTK does not show a popover that does not fit. The
menu now scrolls past 480 pixels, and the button sits beside the chain
heading, where the split cannot push it down the screen.
The window code becomes an effector_gui library so a new GUI test binary
can drive the real window under Xvfb; ctest skips it when xvfb-run is
missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Slit shift, channel split, pixel sort, corruption, shatter, warp, bit
crush and feedback: tearing bands sideways, knocking the colour planes
out of register, sorting runs of pixels, damaging blocks the way a broken
stream does, breaking the picture into shards, pushing it along a noise
field, mangling its bytes and laying it over itself again and again.
All eight are pure transforms. None needs sources, so any of them can
lead a chain, and like blur they start from a crop of a random source
when they do and photographs are loaded. canvasFromSources holds that
start once for them.
Each draws its whole plan from the rng before touching a pixel, and
pixel sort hands every line a seed of its own, so the parallel work
never decides anything. The rotations in shatter and feedback take their
sine and cosine from a short series of plain multiplications rather than
libm, so a seed lands on the same pixels whatever the machine's maths
library makes of std::sin.
The tests hold every one of them to the same things -- a seed
reproduces it, it runs without sources and as a later stage, a sliver
of a canvas does not trip it, turned right down it leaves its input
alone -- plus a check of what each actually does, and the registry now
checks that no two effects declare the same param key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A picture with a title, a caption and a credit meant typing the same
font, size and colour into every text stage, and changing the look meant
typing them all again. A project now holds named styles: a stage follows
one, and editing it moves every stage that follows it at once.
The front-ends learn nothing effect-specific. A ParamSpec can be marked
.styled(), saying a style carries it rather than the stage, and
Effect::styleKind() names the pool it comes from -- so styleSpecs(kind)
is to a style what params() is to a stage, and a second text-ish effect
would slot into the styles that already exist. The look is what a style
carries; the words and the placement stay on the stage, which is what
lets two stages share a typography in two different corners.
stageValues() resolves one in a single place, and a stage keeps a full
set of values of its own beside the style, so switching it to Custom,
dropping the style, or opening the project in a build that does not know
it renders exactly the same picture. A style moves stages together; it
never holds the only copy of anything.
The command line builds no styles and passes none, so it renders what it
always did.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Trying a stage out meant removing it and building it again from scratch,
settings and all, to see what the picture looked like without it. A stage now
carries an `enabled` flag and can simply be switched off: it keeps its place
in the chain and everything it was set to.
`enabledStages` is the one place that reads the flag, and renderChain,
chainNeedsSources, chainTitle and chainSlug all go through it. A disabled
stage is skipped whole — handed no image and drawing nothing from the shared
rng — so switching one off renders byte for byte what the chain rendered
before that stage was added, which is the only thing that makes the switch
worth anything while comparing. Whichever stage runs first is the one handed
the sources, so disabling a leading scanlines lets blur lead and the chain
needs no images at all. The status line and the generated file name follow
too: they name what was rendered, not what sits in the sidebar. A chain with
every stage disabled throws rather than quietly rendering nothing.
In the interface it is a check on the chain row: the row dims, the params
heading says "(off)" and the settings stay editable — a stage being worked on
is not the same as one being deleted. On the command line it is
`--disable NAME`, which picks its stage by effect name exactly as the params
do. A project writes `"enabled": false` only for a stage that is off, so
existing project files are unchanged and an ordinary one stays uncluttered.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The canvas was two spin buttons, so "an Instagram story" or "A4 at 300 dpi"
was a number the user had to work out. src/core/canvas.cpp now holds one
table of standard sizes both front-ends read: a web format is a fixed pixel
size, a print format a sheet in millimetres that becomes pixels at a dpi.
Adding a format is a line in canvasFormats() — the dropdown, --format and
--help all walk the table.
The pixels stay the truth everywhere; renderChain never hears about formats.
A format is the presentation of a canvas, carried alongside the pixels in
Options and Project and empty for a custom size, and where one is named it
decides the pixels — so a project saved as A4 reopens as A4 rather than as
whatever it happened to measure.
In the interface a format fills the width and height in and greys them out
rather than hiding them: the size a sheet works out to is worth seeing. A
print format also shows a DPI row, and Custom hands the spins back keeping
the last size, which makes starting from a format and then tweaking it the
ordinary path.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The two-dimensional counterpart of scanlines: rectangular tiles cut at
random positions from the source images, in three arrangements. A grid
draws its column widths and row heights once so the cells stay aligned
even when jittered; brick repacks every row on its own so the vertical
seams do not meet; scatter fills the canvas from one of the images and
drops loose tiles over it.
The plan is drawn serially from the rng as scanlines does, but scattered
tiles overlap, so they are painted in plan order on one thread: letting
threads race for the same pixels would leave the output depending on
their scheduling. A source smaller than a tile is repeated to fill the
cell, sideways and then downwards, which keeps grid and brick gapless.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Writes a line or several over its input in a chosen family, weight, size
and colour, optionally on a box filled with a colour or with a picture
from disk. Like the blur and the overlay it needs no sources of its own,
so it can lead a chain; given sources it fills the canvas from a randomly
chosen one first.
Two param types rather than effect-specific branches in the front-ends:
Text, free-form text the user types, and Color, a colour written
"#rrggbb". Both travel as strings, so the interface gets an entry and a
colour button, the command line gets a flag (a colour that does not parse
is refused there rather than drawn as black), and a project keeps them
across a round trip.
The glyphs come from Pango, which draws through Cairo without a display,
so the core stays headless — but they are the one thing here that is not
byte-identical across machines: a machine without the chosen family
renders the substitute its fontconfig picks. Everything the effect is
handed, the rng included, is used exactly as every other effect uses it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
gtkmm sets both the C and the C++ global locale from the environment, so
an unguarded stream writes "0,35" on a German desktop and groups 1920 as
"1.920" — neither of which the reader, or any other JSON reader, can take
back. Both the writer and the number parser now work in the classic
locale: the writer imbues its stream, and the parser uses from_chars
rather than stod, JSON having a point for a decimal mark whatever the
user's mark is.
The seed is read from the digits it was written as rather than from the
double they parsed into: a 64-bit seed has more bits than a double has
mantissa, and a seed that comes back off by a few is a project that no
longer renders its own picture.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Lays a single picture from disk over its input: fitted, filled, stretched,
left at its own size or tiled, centred or pinned to the top left corner,
nudged by an offset and mixed in by its opacity.
The file it needs is a new kind of param, Path, so the interface shows a
chooser and the CLI takes a file name, both without knowing an overlay
exists. Projects write it relative to their own folder, as they do a
source, and Image::load can now hand back the alpha channel instead of
flattening it onto white, so a cut-out PNG keeps its cut-out.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Monochrome is the fourth effect and the third that declares
needsSources() false, so it works as a filter stage at the end of a
cascade and can also lead one, filling the canvas from a source the way
blur and grain do. Its knobs are the channel weighting, the contrast, a
toner and the strength: the weighting offers the mixes a photographer
would make behind the lens, so the colour names weigh that channel most
and "red" darkens a sky the way a red filter does; contrast pulls the
greys away from mid grey; the toners tint the finished greys warm
(sepia), barely (selenium) or cold (cyanotype); and strength mixes the
result back over the colour input, which at 0 is a pass through.
Contrast and toner only ever see one grey, so the whole tail of the
conversion is folded into a 256-entry table per channel, built once
before the parallel pass; the per-pixel work is then integer only, with
the weights as 1024ths and the tints as 256ths. The Rng is touched only
for the source pick and the crop offset, serially, before any threading.
The tests gain a `monochrome` section: neutrality of the output, each
weighting measured on a pure red field, the contrast pivot at mid grey,
both toner directions, strength as a pass through and as a midpoint, and
the sourceless render that stays black.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A canvas side was cast to int with no range check, so a number that did
not fit came back as one that did: `-s 4294968296x600` rendered a
perfectly plausible 1000x600, and a hand-edited project file could ask
for a width the reader turned into something else (or, for a double out
of range, into undefined behaviour).
Both front-ends now check the side before the cast, against one shared
bound in chain.hpp — the 1..20000 the GUI spin buttons already offered,
so the help text, the CLI error, the project reader and the interface
all move together.
The tests gain a `canvas size` section covering the round trip at both
ends of the range and the refusals on either side of it, through the
project reader and through `-s`; the test binary picks up the CLI parser
to do it, which stays GUI-free.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Grain is the third effect and the second that declares needsSources()
false, so it works as a filter stage in a cascade and can also lead one,
filling the canvas from a source the way blur does. Its knobs are the
amount a grain may push a pixel, the grain size in pixels, whether the
channels are drawn apart into coloured grain, and whether the response is
weighted towards the midtones — which it is by default, since film grains
least where it is least exposed. That last one means grain over an empty
canvas stays black unless the weighting is turned off.
Determinism comes from the same shape the scanlines effect uses: the
whole grain field is drawn serially from the Rng into one cell per grain
before any threading, and only the integer pixel arithmetic afterwards
runs under parallelFor.
The canvas fill blur used to keep to itself moves to
effects/source_fill.hpp unchanged, now that two effects want it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Whether an effect works from the loaded photographs is now part of the
declarative plug-in contract, next to params(): Effect::needsSources()
defaults to true, and blur — which only softens what it is handed — says
no and blurs an empty canvas when given nothing.
Only the first stage of a cascade ever sees the sources, so
chainNeedsSources() just asks the first stage. Both front-ends gate on
that instead of on "are there any images": the CLI only refuses an empty
batch when the chain wants one, and the interface renders a blur-led
chain with no images loaded, saying whichever thing is actually missing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A project is the whole setup as a small text file: the source paths, the
effect chain with its params, the canvas and the seed. Reading and writing
are driven by the effects' ParamSpecs rather than by whatever sits in a
stage's values, so a new effect is saveable without touching this code, a
key an effect does not declare is never written or read back, and an old
project keeps the defaults for params that did not exist when it was
saved. Paths under the project's own folder are written relative, so a
folder of images and their project can be moved whole.
src/core/project.cpp carries its own small JSON reader instead of a
dependency, and names the line when a hand-edited file is wrong.
The interface gets a header-bar menu: New, Open, Save, Save As, with
Ctrl+N/O/S. The title shows the project name. Opening a project replaces
the sources, discarding a decode still in flight rather than mixing it
into the new project.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
renderChain runs a list of stages in order: stage 0 works on the loaded
sources, every later one on the output of the stage before it, so blur
after scanlines softens the scanlines rather than the photographs. The
effects themselves are untouched — none of them knows whether its input
came from disk. All stages share one Rng and run in sequence, so a seed
still reproduces the cascade byte for byte.
The sidebar grows an "Effect chain" list: add a stage from a menu built
from the registry, reorder it, remove it, and edit the selected stage's
params underneath. Each stage keeps its own values. The CLI takes the
same chain from repeated -e, with every flag going to the stage whose
effect declares it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Fills the canvas from one source, tiling it when it is smaller, then
applies a separable box blur repeated `passes` times to approximate a
gaussian. Params: radius, passes, direction and first_source, so the CLI
flags and the GUI widgets come out of the ParamSpecs as usual.
All random values (source index and crop offset) are drawn serially
before the parallel pixel work, so a seed reproduces the image exactly;
the box window clamps at both ends and the radius is clamped to the
canvas so an oversized radius cannot read out of bounds.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Decoding a batch of photographs took seconds on the main thread, so the
window froze with no sign of what was happening. loadImages now takes an
optional LoadProgress (per-file callback plus a cancel flag) and hands files
out from a shared cursor, so one large file cannot stall the queue behind it.
The GUI decodes off the main thread and shows a progress window with the
count, the current file and a Cancel button; it only appears if the batch is
still running after 250 ms. Headless mode keeps a "reading n/total" line on
stderr when it is attached to a terminal.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Port of the Python prototype to C++20 with a CMake build:
- effector_core: GUI-free static library (effects, image IO via gdk-pixbuf,
declarative param specs, registry, portable seeded RNG, thread helper)
- scanlines effect: plans strips from the seeded RNG, then copies pixels in
parallel with memcpy and doubling horizontal tiling
- gtkmm 4 interface: native file dialogs, widgets generated from the param
specs, coalesced background renders, preview as a GDK memory texture
- CLI: flags generated from the effect registry, headless rendering with no
display required
- ctest suite covering the RNG, registry, effect geometry and image round trip
The Python prototype is kept under python-reference/.
